REMOVAL AND INSTALLATION HUB WHEEL REMOVAL OF THE HUB WHEEL 1 - Place the machine on blocksthat are high enough to rai- se the wheels from the ground, and fully raise the working equipment. 2 - 2 – Loosen the nuts (1) and take off the tire (2). 1 1 2 RKSA0730 3 - Loosen the drainage plug (3) in order to drain the chain- gearing lubrication oil. 4 Gear-box oil: max. 14.4 # To facilitate oil drainage, remove the vent plug (4). 3 RKSA1190 4 - Loosen the nuts (5) and take off the cover (6). 5 2 # Check the condition of the seal (7) and install a new one if necessary. 5 6 7 RKSA0740 30-35 SK714-5 SK815-5 RKS01750