REMOVAL AND INSTALLATION HUB WHEEL 5 - Start the engine and allow the pinion (8) to turn slowly until the master links (9) are both positioned on the up- per section of the chain. 9 8 9 6 - Remove the pins (10) and pull out the master link (9). 3 10 RKSA0750 7 - Turn the wheel hub (11) to release it from the chain. 8 - Attach the complete hub (11) to some hoisting tackle and apply a slight tension to the cables. 9 - Loosen the nuts (12) and remove the hub (11). # Check the condition of the O-ring and put in a new one if necessary. 11 12 4 Hub: 55 kg 11 12 RKSA0760 INSTALLATION OF THE WHEEL HUB To install, reverse removal procedure. 1 Nuts: 186 Nm 9 9 2 Nuts:
29 Nm 3 RKS01760 # Make sure that the master link is in the correct position with respect to the pinion. 1 - Adjust the tension of the chains. (For details, see «20. TESTING AND ADJUSTMEN- TS»). 2 - Fill the oil up to maximum level. Oil level 4 Nuts: 235 Nm RKS01771 30-36 SK714-5 SK815-5