REMOVAL AND INSTALLATION WHEEL HUB DISMANTLING THE WHEEL HUB 1 - Remove the wheel hub (1). (For details, see “REMOVAL OF THE WHEEL HUB”).. 1 RKSA0761 2 - Place the wheel hub (1) in a vice and loosen the screws (2). 1 1 3 - Remove the disk (3) and the shims (4). # Make a note of the number and positions of the shi- ms (4). 2 3 2 4 RKSA0780 4 - Remove the ring bevel gear (5). # Make a note of which way the ring bevel gear (5) is facing with respect to the hub (1). 5 1 RKSA0790 5 - Position the wheel hub (1) beneath a press and slowly extract the axleshaft(6)until it is released fromthe inner ring (7). # Place the wheel hub (1) on two supports , about 520 mm high.
6 7 6 - Remove the inner ring (7). 7 - Proceed with the extraction of the axle shaft (6) until it is released from the bearing (8). 8 3 A A RKS01860 30-37 SK714-5 SK815-5