Valve head thickness Measure the valve head thickness, and replace the valve if the measured value is beyond the limit. EFM2037I Measuring position EA0M4052 Install the valve into the cylinder head valve guide, then check and see if it is centered with the valve seat using a spe- cial tool. - 43 - Dimension Standard Limit Description Intake valve 1.5 mm 1 mm or less Exhaust valve 1.5 mm 0.9 mm or less ) Valve guide • Install the valve into the valve guide and measure the clearance between them by valve movement. If the clearance is excessive, measure the valve and replace either the valve or the valve guide, whichever worn more.
Valve stem end play Standard Limit Intake valve 0.04 ~ 0.07 mm 0.2 mm Exhaust valve 0.06 ~ 0.09 mm 0.25 mm Dimension Description Standard Limit Intake valve 1.5 mm 1 mm or less Exhaust valve 1.5 mm 0.9 mm or less Standard Limit Intake valve 0.04 ~ 0.07 mm 0.2 mm Exhaust valve 0.06 ~ 0.09 mm 0.25 mm