Run-out Support the camshaft on two V blocks and check for run-out using a dial indi- cator. Correct or replace the cam shaft if the amount of run-out is beyond the value indicating need for servicing. EA0M4066 3) Cam shaft end play Push the thrust plate toward the cam gear. With a feeler gauge, measure the clear- ance between the thrust plate and camshaft journal. If the end play is excessive, replace the thrust plate. EA0M4067 3.2.6. Crank shaft 1) Defect check Visually check the crankshaft journal and crank pins for scores or cracks. Using a magnetic particle test and color check, inspect the crankshaft for cracks, and replace the crankshaft which has cracks.
- 49 - Standard Limit 0.05 mm 0.2 mm Standard Limit 0.13 ~ 0.27 mm 0.2 mm