daewoo DE12T / P126TI — Daewoo DE12T / P126TI User Manual

4) Piston ring tension With a tension tester, measure piston ring tension. Replace the piston ring if the measured value is beyond the limit. EA0M4031 2) Clearance Measure the clearance between the pis- ton pin and connecting rod bushing, and replace either of them, whichever dam- aged more, if the measured value is beyond the limit. EA3M2047 3) Condition check Check the engaged condition of the pis- ton and piston pin. If it is possible to force the pin into the piston heated with piston heater, the piston is normal. When replac- ing the piston, be sure to replace the pis- ton pin together.

- 56 - Standard Top ring 2.27 ~ 3.41 kg 2nd ring 2.0 ~ 3.0 kg Oil ring 4.03 ~ 5.57 kg iston pin Wear Measure the amount of wear on the pis- ton pin at the points as shown. The mea- sured values are beyond the limit (0.005 mm or greater), replace the pin Standard Limit 44.995 ~ 45 mm 44.990 mm or less Standard Limit 44.995 ~ 45 mm 44.990 mm or less Limit 0.011 mm