daewoo DE12T / P126TI — Daewoo DE12T / P126TI User Manual

3.3.8. Flywheel Install a guide bar into a bolt hole on the crank shaft, and lift the flywheel to align the dowel pin with the pin hole on the fly- wheel for temporary assembly opera- tion. Install bolts in the remaining holes, take out the guide bar, then install a bolt in the hole where the guide bar had been inserted. Tighten the fixing bolts using a torque EAMD081I wrench in a diagonal sequence to spec- ified torque. 4 8 6 1 2 5 7 3 EAMD097I 3.3.9. Timing gear case Mount gasket using dowel pin on the cylinder block. Install the timing gear case by aligning the dowel pin with the dowel pin hole on the timing gear case. EAMD082I - 62 - Torque 18 kg•m