3.3.10. Fuel injection pump drive gear assembly Mount gasket by aligning the bolt holes with the pin holes on the bearing hous- ing. Tighten up the fixing bolts in the direc- tion of fuel injection pump. EAMD027I 3.3.11. Timing gear Install the oil pump idle gear onto the No.7 bearing cap. Install a thrust washer over the camshaft and assemble the cam gear by aligning it with camshaft key groove. Idle gear pin EAMD083I With the oil port on the idle gear pin fac- ing the cylinder block, install the idle Idle gear pin gear pin.
EA8M3004 Install the idle gear by coinciding the marks impressed on the crank gear, Mark "2" cam gear, fuel injection pump drive gear, Fuel injection pump drive gear Cam gear and idle gear. Install a thrust washer on the idle gear 2 2 2 1 1 1 and tighten to specified torque. Idle gear Crank gear Mark "0" Mark "1" EA8M3005 - 63 - Torque 2.2 kg•m Torque 6.2 kg•m