daewoo DE12T / P126TI — Daewoo DE12T / P126TI User Manual

Adjust the valve clearance as following guide. After letting the #1 cylinder’s piston come at the compression top dead center by turning Loosen the lock nuts of rocker arm adjusting screws and push the feeler gauge of specified the crankshaft, adjust the valve clearances. value between a rocker arm and a valve stem and adjust the clearance with adjusting screw respectively and then tighten with the lock nut. As for the valve clearance, adjust it when in cold, as follow. Model Intake Valve Exhaust Valve DE12T P126TI 0.3 mm 0.3 mm - By cranking the engine, let #6 cylinder’s valves overlap. - In time, adjust the valve clearance corresponding to “ ” of lower lists.

- Adjust the valve clearance corresponding to “ ” of lower lists. - After reinsuring the valve clearances, retighten if necessary. No. 1 Cylinder is located at the side where flywheel was installed. Intake Valve Exhaust Valve Cylinder No. Cooling Fan Flywheel 1 2 3 4 5 6 EA8O6001 - 71 -