. OPERATION MACHINE OPERATIONS AND CONTROLS Check Oil Level in Engine Oil Pan, Add Oil WARNING after the engine is stopped and may cause serious burns. Wait for the oil 2. Remove dipstick (G), and wipe the oil off with a cloth. 3. Fully insert dipstick (G) into filler pipe (F), then remove it. If the oil level is below the L mark, add oil through oil filler (F). REMARK When checking the oil level after the engine has been operated, wait for at least 15 minutes after stopping the engine before checking. If the machine is at an angle, make it horizontal before checking. 3 - 79 Parts and temperature to go down before performing this 1. Open the engine 4.
T he oil level sho uld be between the H and L marks on the ). the ENGINE STOPP ED side of dipstick (G 5. I f the oil level is above the H mark o n the gauge, drain the e p xcess oil from d rain valve (P) at the b ottom of the engin e oil an, then check t he oil level again. ilter cap securely. 6. I f the oil level is c orrect, tighten the oil f