Komatsu — STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS OPERATION MACHINE OPERATIONS AND CONTROLS REMARK Regardless of the ambient temperature, it is possible to start the REMARK Immediately after the engine is started, the engine lubricating oil pressure has not risen sufficiently, so the turbo 3 - 100 engine preheati ng manually. 1. Turn the key in starting switch (3) to the left fr (A). The pre starts. ngine (Preheating c at the left po During the p up to show t hat preheating is taki ng place. hting about 2. The preheati ng monitor starts lig preheating st arts and then goes o ff in about 1 0 seconds 3. After the pre heating monitor goe s off, turn th tarting switch (3) to START position (C).

The engine If t he engine ca nnot be started with t he above pr ocedure, wait for at least two min utes, then start agai n from Step protection funct ion acts to prevent th e engine spe ed from go ing above 1000 rpm fo r a maximum of 20 seconds even if t he fuel contr