Komatsu — AFTER STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS AFTER STARTING ENGINE WARNING Engine Warm Up on the internal structure of the engine at idling for more than 20 minutes, apply a load from time to time or run at a mid-range speed. 3 - 101 Emergency stop on or trouble, turn the starting switch key to the OFF position. If there has been any abnormal actuati on or trouble, turn the starting switch key to the OFF positio Do not carry out operations or operate t he levers or pedals suddenly while the hydraulic oil is at low t emperature. Always carry out the warm-up operation for the hydr aulic equipment until the hydraulic oil temperature monitor i s displayed green.

If the warm-up operation for the hydrau lic equipment is not carried out thoroughly, and the machine is moved, the reaction of the control levers and pedals will be s low and the movement may not be what the operator intend ed. Always warm up the hydraulic equipment. In particular, in cold areas, always warm up the hydraulic equipment thoroug hly. There are two types of warm-up oper ation: warm up the engine and warm up the hydraulic e quipment. In addition, depending on the environment, the method of carrying out the warm-up operation may tems given in the appropriate section.

differ, so carry out the warm-up operation according to the i (When only the engine is warmed up , the hydraulic equipment is not warmed up, so always carry out the warm-up operation for the hydraulic equipment separately from the warm-up operation for the engine. Warm up the hydraulic equipment thoroughly ensures that t control circuits.) he hydraulic oil is warmed up and that warm hydraulic oil circulates in all the Checking of Engine Startability and Noise When starting the engine, check that t he engine causes no abnormal noise and that it starts up easily and smoothly. Check also that there is no abnormal noise when the engine is idling or when the revolutio n rises slightly.

s, the engine may be ssible. When there is an abnormal nois e at the engine startup and if that condition continue damaged. In that case, ask your K omatsu distributor to check the engine as soon as po Checking of Engine Acceleratio n and Deceleration When stopping the machine during th e operation, check that there is no irregular engine revo lution or that the engine does not stop suddenly. es smoothly when the fuel control dial is turned to the full (Max). lace, watching out for danger in the surroundings.

adly at low idling and in the acceleration and if that condition continues, the Check also that the engine speed ris es smoothly when the fuel control dial is turned to the Carry out these checks in a safe p lace, watching out for danger in the surroundings. adly at low idling and in the acceleration and if that c When the engine performs very b engine may be damaged or confus e the operator's sense of driving or lower the braking ef ficiency, and as a result lead to an unexpected accident. possible. In that case, ask your Komatsu distributor to check the engine as soon as NOTICE Do not accelerate the engine suddenly been completed. Do not run the engine at low idling or hi than 20 minutes.

This will have an adv and will also have an adverse effect engine. If it is necessary to run the e After the engine starts, do not start op erating the machine immediately. First, carry out the fo llowing operations and checks.