Komatsu — REPLACE FUEL MAIN FILTER CARTRIDGE

. MAINTENANCE MAINTENANCE PROCEDURE REPLACE FUEL MAIN FILTER CARTRIDGE WARNING Prepare a container to catch drain fuel. 1. Set the container to catch the fuel under the filter cartridge (1). 2. Using a filter wrench, turn filter cartridge (1) counterclockwise on remove it. 3. Clean the filter cartridge mount on the filter holder and check that there is no dirt or damage. In particular, if there is dirt or damage to seal surfaces (B) or (C), air will be sucked in or fuel will leak, and it will lead to the entry of dirt. 4. Coat the packing surface of the filter cartridge with oil.

4 - 53 After the eng ine has been operated, all parts are at high temperature, so do not replace the fil ter immediately. Wait for all parts to cool down before starting the operation. High pressur e is generated inside the engine fuel piping system when the engine is runnin When replaci ng the filter, wait for at least 30 seconds after stopping the engine to let the i nternal pressure go down before replacing the Do not bring NOTICE Genuine Kom atsu fuel filter cartridges use a special filter that has highly efficient filtering ability. When replacing the filter cartridge, alw ays use a genuine Komatsu part.

The common rail fuel injection system used on this machine consists of more precise part s than the conventional injection pump and no zzle. If any part ot her than a genuine Komatsu filter cartridge is used, dust or dirt may get in and cause problems with the injection system. Alw ays avoid using substitute parts. When carryin g out inspection or maintenance of the fuel system, pay more attention than n ormal to the entry of dirt. If dirt is stuck to any part, use fuel to wash it off completely. Prepare a c Prepare a fi