Komatsu — CHECK BEFORE STARTING

. LOADING SHOVEL MAINTENANCE LOADING SHOVEL MAINTENANCE diagram on the right. 5. If the level is below the correct line, add oil through filler port (F) at the top of the hydraulic tank. NOTICE Do not add oil above the correct level. This will damage the hydraulic circuit and cause oil to spurt out. If oil is added above the correct level, remove plug (1) under the chassis, then loosen drain valve (P) and drain the excess oil.

7 - 23 The proper way to check the hydrau lic oil le vel is as fo W hen the hydraulic oi l is at nor mal temperature (1 30 ° ), the oil level should be within th e blue ra nge of gau ge label (a) the dia gram on the r W hen the hydraulic oil i s at high te mperat ure (50°C t o 80°C), the l level s hould be with in the red range of gauge lab el (b) in the