Case IH AFX8010 — TRANSMISSION Hydrostatic

POWER TRAIN - TRANSMISSION Hydrostatic 9. If the combine is equipped with a powered rear axle, disconnect the fitting plumbed into port (1) and fill the hose with as much oil as possible. 50035349B5 6 10. Disconnect the hose fittings (1) and fill both lines with hydraulic oil. 10033620B5 7 11. Fill the PTO gearbox with oil. Use the dipstick (1) to determine how much oil is needed. 12. Connect the 40 bar(600 psi) pressure gauge to the test fitting (1) Fig.2, on the control pressure manifold. 50030161A5 8 9681 1 27/05/2004 C.20.F / 15