Case IH AFX8010 — TRANSMISSION Hydrostatic

POWER TRAIN - TRANSMISSION Hydrostatic 32. Shift the hydro into neutral, disengage the rear wheel assist and shut off engine. 33. Check oil level in PTO gearbox and make sure all connections are secure. 34. For machines equipped with powered rear axles, refer to Start-Up Procedure for Powered Rear Axle at: Hydrostatic motor - Bleed (D.12.A.28 - F.35.A.25) 35. For machines not equipped with a powered rear axle, install the transmission drive shafts and tighten the retaining bolts. 36. Disconnect all testing equipment. 9681 1 27/05/2004 C.20.F / 18