DISTRIBUTION SYSTEMS - ELECTRICAL POWER SYSTEM SENSORS A sensor is the primary component of a measurement chain that converts the input variable (temperature, capacitance, reluctance) into a signal suitable for measurement. The relationship between the input variable and the measured signal is a characteristic of the sensor. In the above mentioned measurement chain the signal is filtered and treated in order to adapt it to its use. It consists of three elements: the sensor itself; the converter, which converts the output signal from the sensor (in most of the cases into an electric signal); and the conditioner, which transforms the output signal from the converter in the most suitable form.
Generally the term sensor indicates the entire measurement chain. TEMPERATURE SENSORS Generally based on a simple circuit with a thermistor. A thermistor is a resistor that changes its resistance according to the temperature. There are two groups of thermistors: NTC (Negative Temperature Coefficient) and PTC (Positive Temperature Coefficient). In the first case the higher the temperature, the lower is the resistance, and for the PTC the higher the temperature, the higher the resistance. The NTC are often used as sensors to indicate temperature change in fluids, such as the engine coolant fluid. An example of these type of senders is the coolant temperature sender.
The changes in its resistance (which varies with temperature) are relayed to the Universal Display Plus monitor, which operates the bargraph and the warning indicators accordingly. 37 PRESSURE SENDER A pressure sender receives a supply signal and it varies it according to the (oil) pressure. An example is the oil pressure sender, which receives a 5 volt signal and varies it according to the oil pressure. The appropriate module keeps track of these variations and changes its readouts and warnings accordingly. 38 A.30 / 5W