CROP PROCESSING - FEEDING Feeder housing 5. Remove the hairpin clips (1) and nuts from the left side shield (2) . Remove the shield from the feeder housing. NOTE: Hydraulic fluid will drain from the hydraulic lines once they have been disconnected. Have a suitable container ready to catch the draining fluid. 40030318A4 4 6. Disconnect the small hydraulic line (1) from the feeder manifold. Plug the hose and cap the fitting tightly. 7. Disconnect the two large hydraulic lines, (1) from the feeder manifold. Plug these hoses and cap the fittings tightly. Disconnect the hose from the bottom of the feeder manifold and cap the line. 10030320A4 5 10030319A4 6 8.
Disconnect the two main electrical plugs (1) from the feeder manifold block. 10030321A4 7 9712 1 27/05/2004 K.25.E / 7