Case IH AFX8010 — FEEDING Feeder housing

CROP PROCESSING - FEEDING Feeder housing 9. Disconnect the plug connectors (1) from the wire harness. 10030322A4 8 10. Disconnect the connector (1) for the feeder position sensor (2) . Remove the bolt (3) from the position sensor bracket (4) . Remove the position sensor (2) from the feeder housing. 40030324A4 9 11. Remove the four smaller bolts (1) that connect the universal joint to the feeder input shaft yoke. Remove the four larger bolts (2) from the universal joint connecting the main feeder drive shaft (3) and the feeder input shaft (4) . Remove the universal joint. 12. Remove the two bolts (1) from the yoke. Remove yoke (2) from the shaft.

10030325A4 10 10030041A4 11 9712 1 27/05/2004 K.25.E / 8