CROP PROCESSING - FEEDING Feeder housing 13. Slide the main feeder pivot shaft (1) completely off. 40030042A4 12 14. Position a suitable forklift with fork extensions under the feeder housing. To prevent plastic crop deflector damage on the front of the feeder house it can either be removed, or spaced away by using a block between the feeder and the lifting device. Attach a chain from the forklift to the rear of the feeder housing. 15. Remove the bolt and washer (1) from the feeder pivot pin (2) . 10030323 13 NOTE: The universal joint assembly may need to be removed completely to gain access to the left side feeder pivot pin for removal. 16.
Remove pivot pin from feeder housing and combine frame. 40030326A4 14 17. Repeat for opposite side. 18. Once the pins have been removed, the feeder house is no longer attached to the combine. Carefully back the forklift away from the combine to remove the feeder. Have an assistant make sure that no components remain attached to the combine. 9712 1 27/05/2004 K.25.E / 9