Case IH AFX8010 — FEEDING Feeder housing

CROP PROCESSING - FEEDING Feeder housing 4. Grease and install the pivot pin (1) . Install the bolt and washer (2) through the feeder house. 40030326B4 3 5. Repeat for opposite side. WARNING M184D - ALWAYS shut OFF engine, remove the key and engage feeder safety lock in position on lift cylinder before working under header or feeder. Failure to engage feeder safety lock may cause injury or death. 6. Working from the side of the feeder house, raise each lift cylinder up to the feeder house and install the front retaining pin (1) for each lift cylinder in the feeder house. Secure the retaining pins in the feeder frame with the cotter pins (2) . 40030039B4 4 7.

Use the hydraulics to raise the feeder high enough to engage the feeder safety lock. If the feeder safety lock cannot be engaged, lower the feeder house completely to the ground. 40030317 5 9712 1 27/05/2004 K.25.E / 11