Case IH AFX8010 — STORING AND HANDLING Grain storing

CROP PROCESSING - STORING AND HANDLING Grain storing Bubble-up auger - Remove (K.60.B.50 - F.10.A.10) AFX8010 1. To remove the bubble-up assembly, proceed as follows: Remove cover (1) . Remove three cap screws, lock washers and nuts (2) from auger tube cover hinge to provide access to chamber at base of auger. 10034685B5 1 2. Loosen four nuts (1) and remove bolts. Using a suitable hoist, lift auger (2) with bearing and bearing support plate attached, out of the auger tube and store for inspection and possible re-use. 10037337A5 2 3. Loosen nut (1) to raise the idler (2) and remove chain (3) from bubble-up auger drive. Loosen set screws in sprocket and pull off sprocket (4) .

Remove key (5) from gearbox shaft and retain for later use. 10034840A5 3 9716 1 27/05/2004 K.60.B / 10