Case IH AFX8010 — STORING AND HANDLING Grain storing

CROP PROCESSING - STORING AND HANDLING Grain storing 4. Remove two cotter pins and washers (1) from hangar at right hand end of cross auger cover plate (2) . Remove the cover plate (2) by pulling handle at left end like that as shown at front auger (3) towards the right, releasing cover plate. 10021837A5 4 5. With auger in raised position and latch (1) engaged, remove cotter pin and washer (2) . Using a cable, rope or wire, add tension to spring hook so it can be slid off pin (3) . Relax spring tension slowly, and then remove safety cable (4) from pin. 6. Remove M8 cap screws, lock washers and nuts (1) . 10041745A5 5 10041746A5 6 7. Remove M10 cap screw, lock washers and nut (1) .

10041747A5 7 9716 1 27/05/2004 K.60.B / 11