Case IH AFX8010 — LIGHTING SYSTEM

DISTRIBUTION SYSTEMS - LIGHTING SYSTEM Engine component service light - Overview (A.40.A.21 - C.10.A.10) AFX8010 Wiring harness - Electrical schematic frame 37 (A.30.A.88 - C.20.E.37) The engine light is located on the engine platform near the rear rotating beacon. The engine light is used to illuminate the engine compartment. Current flows from the electrical system buss bar and passes through fuse F-34 and connectors X005 , X024 , X071 , and X343 to reach pin 2 of the Engine Light Switch (S-64). When the switch is moved to the "ON" position, current crosses from pin 2 to reach pin 1. Current exits pin 1 to reach pin A of the Engine Light (E-46).

The ground path for the Engine Light exits pin B and travels through connectors X343 and X071 to reach the Rear Frame Ground location #1. This causes the light to illuminate. 9668 1 27/05/2004 A.40.A / 28