DISTRIBUTION SYSTEMS - LIGHTING SYSTEM 9668 1 27/05/2004 A.40.A / 46 N° Test Point Expected Result Other Result (Possible Cause) 5 Depress brake pedal. Measure for 12 volts at RH Brake/Tail Lamp E-12 connector X300 (pin 1). 12 volts If good reading, go to next test point. Open circuit 630 (PU) between Brake Light Relay K-33 (pin 5) and RH Brake/Tail Lamp E-12 connector X300 (pin 1). Short to ground on circuit 630 (PU) between Brake Light Relay K-33 (pin 5) and RH Brake/Tail Lamp E-12 connector X300 (pin 1). Any short to ground will blow the Fuse #52. 6 Disconnect the RH Brake/Tail Lamp E-12.
Measure the resistance on circuit 635 (BK) between RH Brake/Tail Lamp E-12 connector X300 (pin 2) and ground. Less than 1 ohms. If good reading, replace the brake bulb of the RH Brake/Tail Lamp E-12. Open circuit 635 (BK) between RH Brake/Tail Lamp E-12 connector X300 (pin 2) and ground.