Case IH AFX8010 — ENGINE

POWER PRODUCTION - ENGINE ENGINE - Assemble (B.10.A - F.10.A.20) AFX8010 General Notes After taking down the engine, clean and inspect the parts carefully. Read all assembly operations very carefully in order to assemble the parts correctly. The torques of the parts and the instructions must be followed meticulously. Instructions for the main checks and measurements necessary for determining whether the existing parts are sound enough for reuse must be followed meticulously. When totally or partially stripping down the engine, any gaskets that are removed must be replaced with a new gasket.

Before inserting the rotary parts and gaskets in the coupling, it is necessary to lubricate all parts with engine oil. When fitting the oil filter, lubricate the oil filter seal with engine oil. 1. Mount the rocker arm cover (1) and the timing system cover (2) , with new gaskets, tightening the fixing screws to the required torque. IMPORTANT: The fixing screws of the rocker arm cover (1) , must be tightened in the sequence shown in the diagrams in Valve drive - Torque (B.10.A.40 - D.20.A.10) . mid0364a 1 2. Mount the suction hose (1) and tighten the fixing screws to the required torque. Refer to Oil pump - Torque (B.60.A.20 - D.20.A.10) for torque information.

50030332A5 2 9671 1 27/05/2004 B.10.A / 50