POWER PRODUCTION - ENGINE 7. Fit the oil filters (1) , as follows: oil the gaskets; screw down the filters until the gaskets come into contact with the supporting bases; tighten the filter to a torque of 35 - 40 Nm ( 25 - 29 lb ft ). 50030331A5 7 8. Mount the following with their gaskets and tightening the screws to the required torque: fuel pump and mount (1) ; mount with fuel filter (2) and pipes (3) ; connect the pipes (13) , to the fuel pump (1) . 20040333A5 8 9. Fit the heat exchanger (1) , with the gasket and tighten the fixing screws to the required torque. Tighten the screws fixing the pipe clamps and to the spacer. 10. Mount the following with new gaskets:
exhaust manifold (2) ; turbocharger (3) ; oil pipe (1) and (4) ; pipe to actuator (5) . Refer to Turbocharger - Torque (B.30.A.31 - D.20.A.10) for torque information. 50034751A5 9 20040336 10 9671 1 27/05/2004 B.10.A / 52