Case IH AFX8010 — FUEL AND INJECTION SYSTEM

POWER PRODUCTION - FUEL AND INJECTION SYSTEM 3. From the engine bay, take out the fixing screws and remove the tappet cover. Disconnect the fuel pipes from the fuel filter and from the cylinder head. Unhook the springs (3) and lever check (2) . Unscrew the rocker arm shaft fixing screws (1) . MID0356B 3 4. With tool 296170 (2) , constrain the sliding blocks (3) , to the rocker arms (1) . MID0487B 4 5. With the tool (1) , 296190 applied as in the Figure, remove the rocker arm shaft assembly. MID0488B 5 6. Remove the cross-pieces from the valves. Unscrew the screws and remove the electrical connections (1) , from the solenoid valves.

Unscrew the screws (3) , fixing the brackets (4) , retaining the pump injectors (2) . Remove the pump injectors (2) . MID0489B 6 9672 1 27/05/2004 B.20.A / 22