Yanmar — Yanmar Diesel Inboard Shop Manual for One, Two, and Three Cylinder Engines

96 CHAPTER FIVE Pliers Remove plug Cylinder block Core plug Strike here Wlthh7 Sealing edge beforeinstallation Drift ~l-----:c:o:ce~p:,~"--g~lnstaliation tool .. ....... ......................... n Core plugs in the cylinder block prevent damage to the block should the coolant freeze. Cup type plug NOT E Core plugs can he repl aced inexpensively by a machine shop. If machine work is being performed on the engine, have the core plugs replaced at the same time. 1. Tap the bottom edge of the core plug with a hammer and drift. Usc several sharp blows to push the bottom of the plug inward, tilting the top out (Figure 90).

Removal/Installation CAUTION Do not drive core plugs into the engine cast- ing. It will he impossible to retrieve them and they can restrict coolant circulation, re- suIting in serious engine damage. 2. Grip the top of the plug finnlywith pliers. Pull the plug from its bore (Ftgurc 91) and discard it. NOTE The core plugs can also be removed hydrill - ing a hole in the center of the plug and pry -