Yanmar — Yanmar Diesel Inboard Shop Manual for One, Two, and Three Cylinder Engines

FUEL I NJEC TI ON AN D G OVERN OR SYSTEMS 147 7 @ ~Nut Rem oval and I nsta llation ~Retain e r plate f!Ir- Pu elln ject cr R ef er to F igure 23 for an exploded view of the fuel in- jecto r and precombustion cha mber assembly. I. Thoroughly clean the fuel injector and the area around the injector to make sure debris will not fall into the en- gmc. NOTE Plug or cap all fuel openings 10 prevent the enlrance of din or debris. o-- 0 -rIOg o Gasket NOTE Note the location of all washers so they can he returned to their original positions. Heal shield ~':I- -- Precombustion chamber 0-- Copper gas ket ~ ,}- - - C o ppe r gasket 2. Detach the fuel return line from the nipple on the fuel injector.

On mulricylindcr engines, the fuel return line must be removed from all injectors. Hold the injector and remove the fuel return line nut (A, Figure 24) and return line fitting. combustion byproducts even tually affect injector opera- tion. Clogging may affect the spray pattern, which may cause misfiring and decreased engine performance. Yanmar docs nor specify when a fuel injector should be removed for cleaning. A period ic maintenance schedule can be formulated based on when engine performance de- clines due to the injector bec oming clogged. An in jec tor should pc rfonn properly for several hundred hours before requiring service; otherwise, operating proced ures. fuel type or cond ition.

or another cngine problem are responsi- ble for unsatisfactory injec tor ope ration . 3. If necessary, unscrew the fuel line retaining brackets. Detach the high-pressure fuel line (8, Figure 24) from the fuel injector. 4. Unscrew the retainer plate nuts (A, Figure 25), then remove the retainer plate ( 8). 5. Remove the fuel injector (Figure 26). 6, Extract the heat shield and gas ket (f igure 27). The gasket resides in a groove in the top of the heat shield. NOTE Do not damage the precombustion chamber when removing it in Step 7 if it is tight in the cylinder head. If necessary. remove the cyl- inder head to dislodge the precombustion chamber.

Injector service should be limited to removal for exter- nal cleaning. Have a Yanmar dealership or diesel fuel in- jection shop pcr f onn internal cleaning or overhaul.