202 C HAPTER TEN OVERHA UL Disassembly I. Remove the drain plug (A, transmission oil. Figure 5) and drain the 2. The output flange retaining nut is staked (Figure 6). Use a chisel to cut away the staked portion so the nut will rotate. NOTE The output flange retaining nut has left-hand threads. 3. Use a toolor other device to hold the output flange so it cannot rotate. NOTE In Step 8, position the transmission so the transmission input shaji is up when remov- ing the transmissionjlange so the transmis- sion shafts will not fall out. 4. Unscrew the output flange retaining nut by rotating the nut clockwise (left-hand threads). 5. Remove the oil dipstick (Fig ure 7). 6.
Remove the shifter retaining bolts (B, Figure 5) and remove the shifter assembly. 8. Tap on the transmission flange (A, Figure 8) using a soft-faced hammer to dislodge the flange. If tapping will not dislodge the flange, install jackscrews (8) into the 7. Remove the transmission flange retaining bolts.