Yanmar — Yanmar Diesel Inboard Shop Manual for One, Two, and Three Cylinder Engines

OPERATION, LUBRICATION, MAINTENANCE AND TUNE-UP 57 BATTERY CUTAWAY VIEW necessary to restore and maintain maximum power and performance. Perform an engine tune-up as needed at periodic inter- vals to maintain maximum engine performance. If the en- gine is used infrequently, perform a tune-up at least once a season. A tune-up consists of the following: 1. Compression test. 2. Valve adjustment. 3. Idle speed adjustment. Careful and accurate adjustment is crucial to a success- ful engine tune-up. Each procedure in this section must be performed exactly as described and in the order presented.

~ Hydrometer Read with hydrometer level NOTE Some engine settings, such as maximum en- gine speed and torque level, are controlled by adjusting screws in the governor assem- bly. These adjusting screws are set by the manufacturer and secured by a lockwire to prevent unauthorized adjustment. Adjust- ment of these screws should be performed only by trained personnel. Detaching a lockwire may void the engine warranty. Im- proper adjustment can cause engine dam- age. ENGINE TUNE-UP A smooth-running, dependable marine engine is more than a convenience. At sea, it can be the difference be- tween life and death. To keep the engine running right, follow a regular program of preventive maintenance.

Compression Test Check the compression of each cylinder as the first step in a tune-up. A compression test measures the compres- sion pressure at the end of the compression stroke. Its re- sults can be used to assess general cylinder and valve Part of any preventive maintenance program is a thor- ough engine tune-up. A tune-up is a series of adjustments