Yanmar — Yanmar Diesel Inboard Shop Manual for One, Two, and Three Cylinder Engines

82 CHAPTER FIVE ,..-.- A B t o Cylinder block surface 3. If the cylinder bore is damaged or excessively worn, rebore the cylinder bore and install a new piston. If the piston is worn, but the cylinder bore is acceptable, install a new piston. Piston Ring Fit/Installation NOTE Provide the machine shop with the new pis- ton so the cylinder can be bored to the cor- rect dimension. 1. Check the ring gap of each piston ring. To do this, posi- tion the ring at the bottom of the ring travel area and square it by tapping gently with an inverted piston. See Figure 37.