Kaiyi HR25/30T-9 — 제목없음

Start the Diesel engine and let it run until a hydraulic oil temperature of approx. 50є C is established. Move the frequency lever ( 2.3 ) from position A to position 52-55 Hz . Activate the vibration by means of the button vibration on/off ( Use a sirometer to check the vibration at the front drum. If the frequency is not reached or too high, it needs to be adjusted. Vibration system 8 - 7 Issue:

01-10 Measurement / adjustment Default values Measuring point /method Vibration - high frequency 58-63 Hz Drum / Sirometer Vibration - low frequency 52-55 Hz Drum / Sirometer Amplitude 0.5 mm xed value Diesel engine Run-up time vibration 1-2 seconds Stopwatch Checking (and, as the case may be, adjusting) the low vibration frequency is necessary if the default frequency value (see table) is not reached. A sirometer enables you to measure the engine speed and the frequency at any running engine or vibration unit with great accuracy (see section 8.3 Using a sirometer ). Checking the frequency: 8.2 Vibration system:

Adjusting instructions 8.2.1 Frequencies, run-up time and amplitude 8.2.2 Checking the low vibration frequency 2.4 2.3 B A Measurement / adjustment Default values Measuring point /method Vibration - high frequency 58-63 Hz Drum / Sirometer Vibration - low frequency 52-55 Hz Drum / Sirometer Amplitude 0.5 mm xed value Diesel engine Run-up time vibration 1-2 seconds Stopwatch