84 SEBU7901-01 Maintenance Section Power Take-Off Clutch - Check/Adjust/Lubricate Inspect the camshaft for damage to the journals and to the lobes. Identification of metal corrosion Note: If the camshaft is removed for any reason, use the magnetic particle inspection process to check for cracks in the camshaft. Identification of contaminants Identification of built up impurities (corrosion and scale) Inspect the following components for signs of wear or for signs of scuffing: S·O·S Coolant Analysis (Level 2) provides a report of the results of both the analysis and the maintenance recommendations.
Camshaft bearings Camshaft followers For more information about coolant analysis, consult your Caterpillar dealer. Caterpillar Inc. recommends replacing the crankshaft vibration damper. i01506009 Power Take-Off Clutch - Check/Adjust/Lubricate Oil Cooler Core and Aftercooler Core During an overhaul, the removal of the oil cooler core and the aftercooler core is recommended. The oil cooler core and the aftercooler core should be cleaned and pressure tested. SMCS Code: 3055-036; 3055-086 NOTICE New power take-offs should have the clutch adjust- ment checked before being placed into service. The clutch adjustment should be checked again after the first ten hours of operation.
New clutch plates have a “wear period, and the clutch may require several adjustments until the new plates are “worn in”. NOTICE Do not use caustic cleaners to clean the core. Caustic cleaners can attack the internal metals of the core and cause leakage. Obtain Coolant Analysis The concentration of supplemental coolant additive (SCA) should be checked regularly with test kits or with S·O·S Coolant Analysis (Level 1). Further coolant analysis is recommended when the engine is overhauled. A coolant analysis can be conducted in order to verify the condition of the water that is being used in the cooling system.
A full water analysis can be obtained by consulting your local water utility company or an agricultural agent. Private laboratories are also available for water analysis. g00781502 Illustration 44 Caterpillar Inc. recommends an S·O·S Coolant Analysis (Level 2). (1) Instruction plate (2) Serial number plate S·O·S Coolant Analysis (Level 2) Check the clutch adjustment regularly after “wear in”. Heavy-duty applications which have engagements that are frequent and relatively long periods of clutch slippage require more frequent adjustment than light-duty applications. The operating torque should be measured in order to determine if a clutch adjustment is required.
An S·O·S Coolant Analysis (Level 2) is a comprehensive coolant analysis which completely analyzes the coolant and the effects on the cooling system. An S·O·S Coolant Analysis (Level 2) provides the following information: Complete S·O·S Coolant Analysis (Level 2) Refer to the OEM information and instruction plate (1) for instructions on lubrication, adjustment, and other recommendations for service. Perform the maintenance that is specified on the instruction plate. Visual inspection of properties