206 Chapter 15 rates during the late hours of the evening. In this case, the addition of an energy storage system on the customer side of the equation may allow the customer to store energy that is generated during the lowest cost periods and to use it during the most expensive periods. The net result of this is a reduction in the cost of energy to the customer. There is still much debate as to whether the utilities or the customers should own the energy storage on the customer’s side of the meter.
The advantage of the utility owning this resource is that it would be able to manage many small energy storage systems as if they were one larger system, in essence, being able to send commands to discharge or charge these batteries at times of peak demand. On the other side of the coin, the consumers, if they have made the personal investment in these resources, may not be willing to give control to the utilities unless there are some financial incentives for them to do so. Community Energy Storage American Electric Power (AEP) has led the way in the development of a set of standards around CES energy storage systems.
The CES is a form of distributed energy system that can be used to supplement a utilities capacity, add capacity in areas with greater demand, to create a microgrid, or to create an “island” of power. Typically CES units are developed in 25-kWh increments up to about 100 kWh and are installed in neighborhoods, often near a transformer ( Figure 26 ). Aerospace Applications One other final area of interest in respect to lithium-ion and advanced battery systems is in the aerospace industry. Companies such as ABSL, Quallion, Saft, and Mitsubishi Electric have spent many years developing products for use in orbital satellites and other space-based applications.
During the battery industry consolidation that occurred in the early 2010s, lead Figure 26 Community energy storage unit.