daewoo — Daewoo D1146 D1146TI DE08TIS Diesel Engine Maintenance Manual

D1146/D1146TI/DE08TIS MAINTENANCE MANUAL z Install the lower seat of valve spring z After putting inner, outer springs, to the valve guide of cylinder head. install the spring upper seat on it. z Assemble the valve by inserting the valve cotter pressing the valve spring with a special tool. z After installing the valve, check whether the valve is correctly installed or not tapping it lightly with urethane hammer. 3.2.3. Rocker arm assembly (1) Disassembly 1) Disassemble the snap rings that are located at both ends of rocker arm shaft by a plier. 2) Disassemble in the order of washer, rocker arm bracket, rocker arm spring, rocker arm.

G1056 (2) Inspection of rocker arm assembly 1) Rocker arm shaft z Rocker arm shaft run-out Place the rocker arm shaft on two V blocks and inspect the shaft for bend using a dial gauge. If the amount of this run-out is small, press the shaft with a bench press to correct the run-out Replace the shaft if the measured value exceeds the limit. 54 Printed in Jan. 2001 PS-MMA0415-E1A Limit 0.2 mm