05-E2B, 05-E2BG, WSM DIESEL ENGINE Radial Clearance 1. If the wheel contact to the housing, replace the turbocharger assembly with new one. W1077353 [2] DISASSEMBLING AND ASSEMBLING (1) Draining Oil and Coolant Draining Oil and Coolant CAUTION Never remove radiator cap until coolant temperature is below its boiling point. Then loosen cap slightly to the stop to relieve any excess pressure before removing cap completely. 1. Prepare a bucket. Open the drain cock to drain coolant. 2. Prepare an oil pan. Remove the drain plug to drain engine oil in the pan. W1021151 (2) External Components Air Cleaner and Muffler 1. Remove the air cleaner. 2. Remove muffler retaining nuts to remove the muffler.
(When reassembling) Install the muffler gasket so that its steel side face the muffler. W1021239 Alternator and Fan Belt 1. Remove the alternator (1). 2. Remove the fan belt (2). 3. Remove the starter (3). (When reassembling) Check to see that there are no cracks on the belt surface. IMPORTANT Q After reassembling the fan belt, be sure to adjust the fan belt tension. (1) Alternator (2) Fan Belt (3) Starter W1021324 S-27 KiSC issued 06, 2011 A