Kubota — SERVICING

05-E2B, 05-E2BG, WSM DIESEL ENGINE Thermostat Assembly 1. Remove the thermostat cover mounting screws (1), and remove the thermostat cover (2). 2. Remove the thermostat assembly (4). (When reassembling) Apply a liquid gasket (Three Bond 1215 or equivalent) only at the thermostat cover side of the gasket (3). (1) Thermostat Cover Mounting Screw (2) Thermostat Cover (3) Thermostat Cover Gasket (4) Thermostat Assembly W10363950 (4) Gear Case and Timing Gears Fan Drive Pulley 1. Secure the flywheel to keep it from turning. 2. Remove the fan drive pulley screw. 3. Draw out the fan drive pulley with a puller.

(When reassembling) Install the pulley to crankshaft, aligning the mark (1) on them (3- cylinder engine). Apply engine oil to the fan drive pulley retaining screw. And tighten it. (1) Aligning Mark W10181950 S-32 KiSC issued 06, 2011 A Tightening torque Fan drive pulley screw 235.4 to 245.2 N·m 24.0 to 25.0 kgf·m 173.6 to 180.8 ft-lbs