05-E2B, 05-E2BG, WSM DIESEL ENGINE Gear Case 1. Remove the gear case. (When reassembling) Grease thinly to the oil seal, and install it, ensuring the lip does not come off. Measure ( L ) when the gear case mounting bolt is inserted in the gear case bolt hole and judge the installation position of the mounting bolt when you do not understand the installation position of the mounting bolt. A : L = 18 mm (0.71 in.) (Pipe Pin Position) B : L = 13 mm (0.51 in.) (Water Pipe Mounting) C : L = 10 mm (0.39 in.) D : Nut (1) Gear Case W1030917 S-33 KiSC issued 06, 2011 A