Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE Coolant density table Minimum Temp ° C -40 -45 -50 Concentration (%) 58 61 64 ° F -40 -49 -58 WARNING the distilled water, see 4 - 27 ve -10 -15 -2 0 -25 -30 -35 ve 14 5 -4 -13 -22 -31 30 36 41 46 50 54 COOLAN T is toxic. When open the drain valve, be careful not to get coola If it gets i n your eyes, flush your e yes with large amount o f fresh water an d see a doctor at once. When cha nging the coolant or whe n handling the coolant c ontaining COOLANT that has been drai ned during repair of rad iator, please co ntact your Komatsu distr ibutor or request a speci alist company t o carry out the operatio n. COOLANT is toxic.

D o not let it flow into drainage ditches or spray it onto the ground surface. NOTICE Do not move the blade when the front cover and engine side c over on t he left side of the machine ar e open. The blade will hit the covers and t here is danger that the c overs may be broken. COOLANT "COOLAN T AND WATER FOR DILUTION (PAGE 4-6 )"). Check the density with a COO Prepare a container whose capa city is larger than the specifie d coolant volume to catch 1. Stop th e engine. diator cap (1) slowly u ntil it hits the stopper and by so ressure. it hits the next stopper, while 2. Turn ra doing, relieving the internal p 3. Turn r adiator cap (1) until depres last sto sing it.

Keep turning th e radiator cap (1) unt il it hits the pper. 4. Remov e the cover under the front cover, then pu ll out drain hose (2 ) and insert it in a cont ainer to catch the dra ined water. 5. Open d rain valve (3) and drai n the water.