MACHINE OPERATIONS AND CONTROLS OPERATION Check that the stow-away type step at the front right part on the outside of the machine is locked in the stowed position. Set the work equipment to the maximum left offset pos- ture shown in the diagram on the right, then raise the boom and check that it stops automatically when it comes close to the operator's compartment. When it stops, lower the boom and cancel the auto- matic stop. Set the work equipment to the maximum left offset pos- ture shown in the diagram on the right, then pull in the arm and check that it stops automatically when it comes close to the operator's compartment.
When it stops, move the arm out and cancel the auto- matic stop. Set the work equipment in the posture shown in the diagram on the right, operate the left offset and check that it stops automatically when it comes close to the operator's compartment. When it stops, lower the boom and cancel the auto- matic stop. Set the work equipment to the maximum right offset posture shown in the diagram on the right (arm pulled in fully), then lower the boom and check that it stops automatically when it comes close to the front right part of the bodywork. When it stops, raise the boom and cancel the auto- matic stop. 3-62