EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE 8.3 CLEANING OF THE AIR INTAKE MANIFOLD Clean as follows: 1. Remove loose gasket material from the cylinder head and intake manifold mating surfaces. 2. Wash all of the parts in clean fuel oil. EYE INJURY To avoid injury from flying debris when using compressed air, wear adequate eye protection (face shield or safety goggles) and do not exceed 276 kPa (40 psi) air pressure. 3. Blow dry with compressed air. All information subject to change without notice. DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION 8-7