Detroit Diesel DD13 DD15 DD16 — Print Preview - C:\DOCUME~1\jcampb01\LOCALS~1\Temp\.aptcache\man81000\man81

14.6 ASSEMBLY OF CYLINDER HEAD 14.6 ASSEMBLY OF CYLINDER HEAD Assembly the cylinder head as follows: 1. Install all of the required cup plugs using a good grade of non-hardening sealant, such as Loctite® 620 or equivalent, on the cup plugs. Use Cup Plug Installation Set (J–35653). 2. Ensure that all cup plugs on the front face of the cylinder head are flush or below the surface. 3. Install valves, valve stem seals, valve springs and keepers. All information subject to change without notice. 14-18 DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION