22.3 INSPECTION OF THE CRANKCASE BREATHER 22.3 INSPECTION OF THE CRANKCASE BREATHER Inspect as follows: 1. Clean the gasket surface of the engine block prior to installation of crankcase breather. 2. Inspect the tubes, clamps and hoses for wear or damage; replace if necessary. 3. Inspect the crankcase breather for cracks or damage; replace if necessary. 4. Inspect the sensor and replace, if necessary. All information subject to change without notice. 22-6 DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION