34.7 INSPECTION OF FLYWHEEL HOUSING AND REAR OIL SEAL AREA OF CRANKSHAFT 34.7 INSPECTION OF FLYWHEEL HOUSING AND REAR OIL SEAL AREA OF CRANKSHAFT Inspect as follows: 1. Inspect flywheel housing for cracks and any other damage. [a] Check sealing surface for damage. [b] Check flywheel housing for cracks. [c] If damaged or cracked, repair is not possible; replace the part. 2. Inspect the flywheel where the rear oil seal makes contact. Check for groove in flywheel; if grooved, replace flywheel. All information subject to change without notice. 34-12 DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION