EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE 34.8 REMOVAL OF RING GEAR Remove the ring gear as follows: 1. Shut off the engine, apply the parking brake, chock the wheels, and perform any other applicable safety steps. 2. Remove the transmission. 3. Remove the flywheel. 4. Using an acetylene torch, cut the ring gear 1/2 to 3/4 of the way through, without allowing the flame to touch the flywheel. 5. The uncut portion will now yield. Tap the ring gear to remove it from the flywheel. All information subject to change without notice. DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPORATION 34-13