146 STARTING AND OPERATING When to Use TOW/HAUL Mode WARNING! Select TOW/HAUL mode when driving in conditions such as: driving in hilly areas, towing a trailer, carrying a heavy load, etc. This mode will improve performance and reduce the potential for transmission overheating or failure due to excessive shifting. Do not use the “TOW/HAUL” feature when driving in icy or slippery conditions. The increased engine braking can cause the rear wheels to slide, and the vehicle to swing around with the possible loss of vehicle control, which may cause an accident possibly resulting in personal injury or death.
FOUR-WHEEL DRIVE OPERATION — IF EQUIPPED Four-Position/On-Demand Transfer Case This electronically shifted transfer case provides four mode positions: F OUR -P OSITION E LECTRONICALLY S HIFTED T RANSFER C ASE I F E QUIPPED Two-Wheel Drive High Range (2WD) — This range is for normal street and highway driving on dry hard surfaced roads. Driving the vehicle in 2WD will have greater fuel economy benefits as the front axle is not engaged in 2WD. TOW/HAUL Switch This is an electronic shift transfer case and is operated by the 4WD Control Switch (Transfer Case Switch), located on the instrument panel.
Four-Wheel Drive High Range (4WD HIGH) — This range provides torque to the front drive shaft (engages four-wheel drive) which allows front and rear wheels to spin at the same speed. This provides additional traction for loose or slippery road surfaces only. The “TOW/HAUL Indicator Light” will illuminate in the instrument cluster to indicate that TOW/HAUL mode has been activated. Pushing the switch a second time restores normal operation. Normal operation is always the default at engine start-up. If TOW/HAUL mode is desired, the switch must be pushed each time the engine is started. Four-Wheel Drive Low Range (4WD LOW) — This range provides low speed four-wheel drive.
It maximizes torque (increased torque over 4WD HIGH) to the front driveshaft; allowing front and rear wheels to rotate at the same speed. This