RAM 1500 — Air Suspension Modes

152 STARTING AND OPERATING CAUTION!­ Default Ride Height: A IR S USPENSION M ODES When in Entry/Exit mode, be aware of your surroundings, you may not have the clearance required for certain areas and vehicle damage may occur. Select Aero Height or Normal Ride Height as the default for all vehicle speeds and operation. This is the selected height that the suspension will level for speed changes (e.g. raising from Entry/Exit Height at speed, lowering from Off-Road Height at speed, etc.). The air suspension system has multiple modes to protect the system in unique situations. The engine should be running to change between Air Suspension Modes.

Automatic AERO Mode The system requires that the ignition be in the ON/ RUN position or the engine running for all user requested changes. When lowering the vehicle, all of the doors must be closed. If a door is opened at any time while the vehicle is lowering, the change will not be completed until the open door(s) is closed. Default ride height can be changed by manually adjusting the ride height switch to Normal Ride Height or Aero Ride Height and stay in the selected height for 2.5 seconds. It will be stored as the default ride height and the height will be maintained until a new default ride height is selected.

To improve aerodynamics, the air suspension system has a feature which will put the vehicle into AERO height automatically Ъ ­page­104. Automatic Aero Mode may be disabled through vehicle settings in the Uconnect Radio (if equipped) Ъ ­page­216. This system uses a lifting and lowering pattern which keeps the headlights from incorrectly shining into oncoming traffic. When raising the vehicle, the rear of the vehicle will move up first and then the front. When lowering the vehicle, the front will move down first and then the rear. If equipped with a touchscreen radio, all enabling/ disabling of air suspension features must be done through the radio Ъ ­page­216.

To assist with changing a tire, the air suspension system has a feature which allows the automatic leveling to be disabled Ъ ­page­216. Tire Jack Mode WARNING!­ Transport Mode After the engine is turned off, it may be noticed that the air suspension system operates briefly; this is normal. The system is correcting the position of the vehicle to ensure a proper appearance. The air suspension system uses a high pressure volume of air to operate the system. To avoid personal injury or damage to the system, see an authorized dealer for service.

For towing your vehicle with four wheels off the road, the air suspension system has a feature which will put the vehicle into Entry/Exit height and disable the automatic load leveling system Ъ ­page­216. To assist with changing a spare tire, the air suspension system has a feature which allows the automatic leveling to be disabled Ъ ­page­104.