Bobcat 325/328 Excavator — 6902610-325-328 om 3-06(8).book

ELECTRICAL SYSTEM (CONT’D) Removing And Installing The Battery Open the right side cover. Figure PM-32 3 3 2 1 P19227 Disconnect the negative (-) cable (Item 1) [Figure PM-32] first. Disconnect the positive (+) cable (Item 2) [Figure PM-32] . Remove the bolts (Item 3) [Figure PM-32] and remove the hold down clamp. Remove the battery. Always clean the terminals and the cable ends, even when installing a new battery. Install the battery. Install the hold down clamp and tighten the bolts. Connect the battery cables. Connect the negative (-) cable (Item 1) [Figure PM-32] last to prevent sparks. WARNING Batteries contain acid which burns eyes and skin on contact.

Wear goggles, protective clothing and rubber gloves to keep acid off body. In case of acid contact, wash immediately with water. In case of eye contact get prompt medical attention and wash eye with clean, cool water for at least 15 minutes. If electrolyte is taken internally drink large quantities of water or milk! DO NOT induce vomiting. Get prompt medical attention. W-2065-1296 325/328 Excavator Operation and Maintenance Manual 76